Robin RGV2800 - Using Electric Power; AC Application

− 15−
ENGLISH
(1) AC APPLICATION
(a) Check the voltmeter for proper
voltage.
■
This generator is thoroughly tested
and adjusted in the factory.
If the generator does not produce the
specified voltage, consult your
nearest dealer or service shop.
(b) Turn off the switch/switches of the
electrical appliance before connecting
to the generator.
(c) Insert the plug/plugs of the electrical
appliance into the receptacle.
■
Check the amperage of the
receptacles used referring to
TABLE
1
, and be sure not to take a current
exceeding the specified amperage.
■
Be sure that the total wattage of all
appliances dose not exceed the rated
output of the generator.
ON
OFF
(d) Turn the no-fuse breaker to the "ON"
position.
RGV28-61(CSA)英取説GU203104.10.286:55PMページ15