Need help?Do you have a question about the Robland NZ 3800 AXIS ERGO and is the answer not in the manual?
Technical specifications for the main saw blade, dimensions, and motor.
Technical specifications for the scoring saw blade, dimensions, and motor.
Machine dimensions, power supply voltage, and weight.
Details on the KEB servo motor, closed-loop system, and accuracy.
Information on the aluminium profile, ball screw, touch screen, and EMC filter.
Steps and parts for assembling the overhead saw guard.
Steps for assembling the upper arm, control unit, and managing cables.
Assembling saw guard, motor belt, and the small table extension.
Connecting servo cables and assembling the large table extension.
Mounting the saw guard and assembling the cross-cut table.
Installing cross-cut fence, scale, and sliding table accessories.
Final steps for mechanical assembly and machine setup.
Connecting the machine to power and ensuring proper earthing.
Verifying correct motor rotation direction for saw blades.
Guide to initiating, setting, and confirming fence positions.
Step-by-step guide for calibrating the fence using test measurements.
Instructions on selecting and inputting desired measurements for cuts.
Procedure for adjusting the angle of the aluminium profile.
Instructions on how to select and change the machine's interface language.
General| Category | Combination machine |
|---|---|
| Spindle diameter | 30 mm |
| Surface planer width | 380 mm |
| Thicknesser width | 380 mm |
| Feed speed thicknesser | 7 m/min |
| Motor power | 5.5 kW |
To Next Page
