Z500-serie V0818 1
EnglishDeutsch
Index
Important instructions when ordering spare parts 2
Safety and maintenance instructions 2
Danger list 3
Operating instructions 4
Normal and prohibited use 5
Explanation of acoustic levels 6
General dimensions 6
Technische gegevens 7
Transportation and installation of the machine 8
Electrical connection 8
Mounting the sliding table 9
Starting the machine 10
Starting the machine version X1,X3 11
Changing main sawblade and scorer sawblade 20
Use and adjustment of the riving knife 21
Lower sawblade cover 21
Adjusting the main sawblade and scorer sawblade Z500 22
Adjusting the main sawblade and scorer sawblade (Z500EL and Z500X) 22
Blocking the sliding table 23
Mounting of the cross-cut table 24
Mounting of the cross-cut fence 25
Adjusting the cross-cut fence 25
Use of the parallel fence 27
Calibration of the scale on the parallel fence 27
Mounting of the roller support 28
Using the saw guard 28
RPM indicator lights 29
Belt tension and speed changing 30
Belt tension and speed changing scoring saw 30
Maintenance of the machine 31
Problems: causes and solutions 31
To Next Page
Need help?
General
