Robland Z400 X1 User Manual

Z400-serie V0119 1
EnglishDeutsch
Index
Important instructions when ordering spare parts 2
Safety and maintenance instructions 2
Danger list 3
Operating instructions 3
Normal and prohibited use 4
REMAINING RISKS 4
Explanation of acoustic levels 5
General dimensions 5
Technical Data 6
Transportation and installation of the machine 7
Electrical connection 7
Mounting the sliding table 8
Starting the machine 9
Starting the machine version X1 en X3 10
Changing main sawblade and scorer sawblade 18
Use and adjustment of the riving knife 20
Lower sawblade cover 20
Adjusting the main sawblade and scorer sawblade Z400M 21
Adjusting the main sawblade and scorer sawblade (Z500EL and Z500X) 21
Blocking the sliding table 22
Mounting of the cross-cut table 23
Mounting of the cross-cut fence 23
Adjusting the cross-cut fence 24
Use of the parallel fence 25
Calibration of the scale on the parallel fence 26
Cutting with mitre fence 26
Mounting of the roller support option 27
Using the saw guard 27
RPM indicator lights 28
Belt tension and speed changing 29
Belt tension and speed changing scoring saw 29
Maintenance of the machine 30
Problems: causes and solutions 30

Robland Z400 X1 Specifications

General

Saw Blade Diameter	400 mm
Max. Cutting Height 45°	100 mm
Saw Blade Speed	3000/4000/5000 RPM
Crosscut Fence with 2 Flip Stops	Yes
Dust Extraction Outlet Diameter	120 mm
Voltage	400 V
Frequency	50 Hz
Tilting Saw Blade	0° - 45°