Robland Z400 Series User Manual

Z400-serie V0119 1
EnglishDeutsch
Index
Important instructions when ordering spare parts 2
Safety and maintenance instructions 2
Danger list 3
Operating instructions 3
Normal and prohibited use 4
REMAINING RISKS 4
Explanation of acoustic levels 5
General dimensions 5
Technical Data 6
Transportation and installation of the machine 7
Electrical connection 7
Mounting the sliding table 8
Starting the machine 9
Starting the machine version X1 en X3 10
Changing main sawblade and scorer sawblade 18
Use and adjustment of the riving knife 20
Lower sawblade cover 20
Adjusting the main sawblade and scorer sawblade Z400M 21
Adjusting the main sawblade and scorer sawblade (Z500EL and Z500X) 21
Blocking the sliding table 22
Mounting of the cross-cut table 23
Mounting of the cross-cut fence 23
Adjusting the cross-cut fence 24
Use of the parallel fence 25
Calibration of the scale on the parallel fence 26
Cutting with mitre fence 26
Mounting of the roller support option 27
Using the saw guard 27
RPM indicator lights 28
Belt tension and speed changing 29
Belt tension and speed changing scoring saw 29
Maintenance of the machine 30
Problems: causes and solutions 30

Robland Z400 Series Specifications

General

Saw Blade Diameter	400 mm
Scoring Saw Blade Diameter	120 mm
Frequency	50 Hz
Saw Blade Speed	4000 rpm
Voltage	400 V

Summary

Safety and maintenance instructions

Danger list

Lists mechanical and other risks associated with woodworking machinery operations.

Operating instructions

Guidelines for safe operation, including user training, stability, and tool handling.

Normal and prohibited use

REMAINING RISKS

Highlights the most significant potential hazards during panel saw operation.

Transportation and installation of the machine

Electrical connection

Mounting the sliding table

Starting the machine

Starting the machine version X1 en X3

2.1 INGEVEN VAN EEN MAAT

3.1.1 SETTING SAW BLADE

3.1.2 SETTING THE GROOVE CUTTER

3.1.5 CALIBRATION OF PARALLEL FENCE

Changing main sawblade and scorer sawblade

Use and adjustment of the riving knife

Adjusting the main sawblade and scorer sawblade Z400M

Adjusting the main sawblade and scorer sawblade (Z500EL and Z500X)

Blocking the sliding table

Mounting of the cross-cut table

Mounting of the cross-cut fence

Adjusting the cross-cut fence

Use of the parallel fence

Calibration of the scale on the parallel fence

Using the saw guard

Belt tension and speed changing

Belt tension and speed changing scoring saw

Maintenance of the machine

Problems: causes and solutions

Basic settings of a Panel saw

1. Movement of the sliding table

4. Lining of the telescopic arm.

5. Perpendicularity

6. 90° and 45° setting of the sawblade.