EasyManua.ls Logo

Robomow MC400 - User Manual

Robomow MC400
58 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Questions and Answers

Summary

Chapter 1 - Introduction And Safety

1.2 Warning Decal Definitions

Symbols on Robomow; read carefully before operating.

1.3 Safety Warnings & Precautions

Safety instructions and precautions for training, preparation, and operation.

1.4 Robomow Safety Features

Describes safety features like Child Lock, Anti-Theft, Sensors.

Chapter 2 - Know Your Robomow

2.2 How Robomow Works for You

Explains the basic functionality and setup of Robomow.

2.3 Robomow Features

Details key features like Edge Cutting, TurboMow, SmartMow, and App.

Chapter 3 - Planning Ahead

3.2 Select Base Station Location

Guidelines for choosing an optimal location for the Base Station.

3.3 Select Power Box Location

Considerations for selecting a suitable location for the Power Box.

3.4 Planning the Perimeter Wire Layout

Covers planning the perimeter wire for objects and slopes.

Chapter 4 - Initial Setup

4.1 Preparations

Recommendations and tools needed before starting the setup process.

4.1.2 Installing the Power Box

Steps to mount and connect the Power Box.

4.2 Perimeter Wire Setup

Planning the perimeter wire layout and Base Station location.

4.2.1 Starting Point: Perimeter Wire at the Base Station area.

How to start laying the perimeter wire from the Base Station.

4.2.2 Laying the Perimeter Wire

Securing the wire with pegs and determining distances from edges and obstacles.

4.3 Perimeter Wire within the Working Area

Covers wire setup for obstacles and special areas.

4.3.2 Perimeter Islands

Demarcating areas with islands for objects that cannot withstand collision.

4.3.3 Setting a Narrow Pass

How to set up a narrow pass between zones for mower passage.

4.4 Fastening Perimeter Wire to the Ground

Instructions and warnings for hammering pegs to secure the wire.

4.5 Back at the Base Station - Completing the Perimeter Wire Setup

Connecting the beginning and end of the wire to the Base Station.

4.6 Placement and connection of the Base Station

How to position and connect the Base Station.

4.7 Connecting the Power Box

4.8 Setup in a Non-Base Zone

Installing a Perimeter Switch for areas not connected to a Base Station.

4.8.1 Determining the Perimeter Switch Location

4.8.3 Laying out the Perimeter Wire

4.8.4 At the Perimeter Switchs location

Chapter 5 - Preparing Robomow

5.1 Adjust the Cutting Height

5.2 One-Time Setup (Step by Step)

Step-by-step guide for the initial setup process.

5.2.5 Test Base Station Position

Steps to test and verify the Base Station's placement.

5.2.6 Test Wire Position

Testing the perimeter wire's position for correct operation.

5.2.7 After Setup is Completed

Chapter 6 - Robomow Operation

6.1 Automatic Operation

How Robomow operates automatically in cycles.

6.2 Operating Panel

Overview of the operating panel, buttons, and indicators.

6.3 Manual Operation

How to manually operate the mower for specific tasks.

6.4 Menu Options

6.4.1 Basic Settings

6.4.2 Advanced Settings

P003 Near Wire Follow

P007 Rain Sensor

P010 Child Lock

P011 Anti-Theft; Disabling Device

Alarms against unintended use or removal.

P021 Program On;Off

P022 Add Sub-Zone

P024 SmartMow

P026 TurboMow

6.5 Operation in a Non-Base Zone (using a Perimeter Switch)

How to operate Robomow in a zone without a Base Station.

Chapter 7 - Using The Power Box

7.1 Power Box Alerts

Explains various alerts indicated by the Power Box.

7.3 Enable;Disable the Automatic Operation

How to pause or resume automatic operation.

Chapter 8 - Charging

8.1 Charging During the Season

8.2 Charging Out of Season

Chapter 9 - Troubleshooting and User Messages

9.1 General Error Codes

Lists common error codes and their probable causes.

9.2 Detailed Error Codes

Provides detailed error codes, causes, and corrective actions.

9.3 User Messages

Information about user messages displayed on the mower.

9.4 Basic Troubleshooting

General troubleshooting for common issues without error codes.

9.4.1 Description of No-Depart Codes

Explains codes related to the mower not departing for operation.

Chapter 10 - Product Specification

Product Specification Table

Detailed technical specifications for RC304, RC308, and RC312 models.

Chapter 11 - Maintenance and Storage

11.1 General Instructions

General advice on safety, cleaning, and part replacement.

11.2 Battery Maintenance and Disposal

11.3 Winter Storage and Service

11.4 Maintenance of the Mowing Deck

11.5 Maintenance of the Blade

Procedures for examining, replacing, and safety for the blade.

11.6 Splicing the Perimeter Wire

Warranty Card

C Series Limited Warranty

Details the limited warranty terms for C-series products.

Summary

Chapter 1 - Introduction And Safety

1.2 Warning Decal Definitions

Symbols on Robomow; read carefully before operating.

1.3 Safety Warnings & Precautions

Safety instructions and precautions for training, preparation, and operation.

1.4 Robomow Safety Features

Describes safety features like Child Lock, Anti-Theft, Sensors.

Chapter 2 - Know Your Robomow

2.2 How Robomow Works for You

Explains the basic functionality and setup of Robomow.

2.3 Robomow Features

Details key features like Edge Cutting, TurboMow, SmartMow, and App.

Chapter 3 - Planning Ahead

3.2 Select Base Station Location

Guidelines for choosing an optimal location for the Base Station.

3.3 Select Power Box Location

Considerations for selecting a suitable location for the Power Box.

3.4 Planning the Perimeter Wire Layout

Covers planning the perimeter wire for objects and slopes.

Chapter 4 - Initial Setup

4.1 Preparations

Recommendations and tools needed before starting the setup process.

4.1.2 Installing the Power Box

Steps to mount and connect the Power Box.

4.2 Perimeter Wire Setup

Planning the perimeter wire layout and Base Station location.

4.2.1 Starting Point: Perimeter Wire at the Base Station area.

How to start laying the perimeter wire from the Base Station.

4.2.2 Laying the Perimeter Wire

Securing the wire with pegs and determining distances from edges and obstacles.

4.3 Perimeter Wire within the Working Area

Covers wire setup for obstacles and special areas.

4.3.2 Perimeter Islands

Demarcating areas with islands for objects that cannot withstand collision.

4.3.3 Setting a Narrow Pass

How to set up a narrow pass between zones for mower passage.

4.4 Fastening Perimeter Wire to the Ground

Instructions and warnings for hammering pegs to secure the wire.

4.5 Back at the Base Station - Completing the Perimeter Wire Setup

Connecting the beginning and end of the wire to the Base Station.

4.6 Placement and connection of the Base Station

How to position and connect the Base Station.

4.7 Connecting the Power Box

4.8 Setup in a Non-Base Zone

Installing a Perimeter Switch for areas not connected to a Base Station.

4.8.1 Determining the Perimeter Switch Location

4.8.3 Laying out the Perimeter Wire

4.8.4 At the Perimeter Switchs location

Chapter 5 - Preparing Robomow

5.1 Adjust the Cutting Height

5.2 One-Time Setup (Step by Step)

Step-by-step guide for the initial setup process.

5.2.5 Test Base Station Position

Steps to test and verify the Base Station's placement.

5.2.6 Test Wire Position

Testing the perimeter wire's position for correct operation.

5.2.7 After Setup is Completed

Chapter 6 - Robomow Operation

6.1 Automatic Operation

How Robomow operates automatically in cycles.

6.2 Operating Panel

Overview of the operating panel, buttons, and indicators.

6.3 Manual Operation

How to manually operate the mower for specific tasks.

6.4 Menu Options

6.4.1 Basic Settings

6.4.2 Advanced Settings

P003 Near Wire Follow

P007 Rain Sensor

P010 Child Lock

P011 Anti-Theft; Disabling Device

Alarms against unintended use or removal.

P021 Program On;Off

P022 Add Sub-Zone

P024 SmartMow

P026 TurboMow

6.5 Operation in a Non-Base Zone (using a Perimeter Switch)

How to operate Robomow in a zone without a Base Station.

Chapter 7 - Using The Power Box

7.1 Power Box Alerts

Explains various alerts indicated by the Power Box.

7.3 Enable;Disable the Automatic Operation

How to pause or resume automatic operation.

Chapter 8 - Charging

8.1 Charging During the Season

8.2 Charging Out of Season

Chapter 9 - Troubleshooting and User Messages

9.1 General Error Codes

Lists common error codes and their probable causes.

9.2 Detailed Error Codes

Provides detailed error codes, causes, and corrective actions.

9.3 User Messages

Information about user messages displayed on the mower.

9.4 Basic Troubleshooting

General troubleshooting for common issues without error codes.

9.4.1 Description of No-Depart Codes

Explains codes related to the mower not departing for operation.

Chapter 10 - Product Specification

Product Specification Table

Detailed technical specifications for RC304, RC308, and RC312 models.

Chapter 11 - Maintenance and Storage

11.1 General Instructions

General advice on safety, cleaning, and part replacement.

11.2 Battery Maintenance and Disposal

11.3 Winter Storage and Service

11.4 Maintenance of the Mowing Deck

11.5 Maintenance of the Blade

Procedures for examining, replacing, and safety for the blade.

11.6 Splicing the Perimeter Wire

Warranty Card

C Series Limited Warranty

Details the limited warranty terms for C-series products.

Robomow MC400 Specifications

General IconGeneral
BrandRobomow
ModelMC400
CategoryLawn Mower
LanguageEnglish

Related product manuals