Robomow MC800 - User Manual

58 pages

Save Page as PDF

To Next Page

Main Page

Questions and Answers

T
Tara BrownAug 4, 2025
What to do if my Robomow MC800 Lawn Mower is stuck in place?
- M
  Michelle ReedAug 4, 2025
  If your Robomow Lawn Mower is stuck because it cannot continue driving, move it from its location and restart it. If the drive wheel motors are working under a severe load, determine the reason for it getting stuck and resolve it. Also, check the ground around the mower for ditches or uneven ground, and fill these in with dirt to level the area. Ensure that the drive wheels can rotate freely without any obstructions. Finally, verify that the cutting height isn't set too low; increase it if necessary.

Summary

Chapter 1 - Introduction And Safety

Safety Decal Meanings

Explanation of safety symbols on the mower.

General Safety Guidelines

Essential safety guidelines for operation and preparation.

Integrated Safety Features

Overview of built-in safety mechanisms.

Chapter 3 - Planning Ahead

Identify Your Lawn Type

Base Station Location Planning

Base Station Placement Rules.

Base Station Placement Rules

Power Box Placement Guidance

Perimeter Wire Layout Planning

Perimeter Islands for Obstacles.

Chapter 4 - Initial Setup

Initial Setup Preparations

Tools and items needed before starting installation.

Perimeter Wire Setup Guide

Perimeter Wire Start Location.

Perimeter Wire Start Location

Perimeter Wire Laying Technique

Wire Placement in Working Zones

Securing Perimeter Wire

Finalizing Perimeter Wire Connection

Base Station Positioning and Connection

Connecting the Power Box

Non-Base Zone Setup

Chapter 5 - Preparing Robomow

Adjust Cutting Height

One-Time Setup Process

Using the Operating Panel.

Using the Operating Panel

Test Base Station Position

Verifying the Base Station's location and signal.

Test Perimeter Wire Position

Ensuring the perimeter wire is correctly laid.

After Initial Setup

Chapter 6 - Robomow Operation

Automatic Operation Mode

How the mower operates autonomously.

Robomow Operating Panel

Manual Operation Mode

Directing the mower manually for specific tasks.

Configuring Menu Options

Basic Settings Overview.

Basic Settings Overview

Advanced Settings Overview

In-depth settings for mowing frequency, islands, and sensors.

Robomow App Configuration

Mowing in Non-Base Zones

How to operate the mower in areas without a Base Station.

Chapter 7 - Using The Power Box

Power Box Alert Interpretation

Interpreting signals and messages from the Power Box.

Enable;Disable Automatic Operation

Enabling or disabling the mower's automated schedule.

Chapter 9 - Troubleshooting and User Messages

General Error Codes

Common error codes and their initial solutions.

User Message Explanations

Explanations for specific messages displayed by the mower.

Basic Troubleshooting Steps

Solutions for common issues not indicated by error codes.

Chapter 10 - Product Specification

Product Technical Specifications

Detailed technical data for different Robomow models.

Chapter 11 - Maintenance and Storage

General Maintenance Advice

Routine care and safety for the mower.

Battery Maintenance and Disposal

Winter Storage Instructions

Mowing Deck Care

Blade Maintenance and Replacement

Inspecting, replacing, and caring for the cutting blade.

Splicing Perimeter Wire