Need help?Do you have a question about the Robomow RX20 Pro and is the answer not in the manual?
General| Type | Robotic lawn mower |
|---|---|
| Noise level | 69 dB |
| Cutting width | 180 mm |
| Product color | Black, Green |
| Cutting system | - |
| Number of zones | 2 |
| Maximum lawn area | 300 m² |
| Multi-Zone capability | Yes |
| Recommended lawn area | 200 m² |
| Maximum cutting height | 45 mm |
| Minimum cutting height | 15 mm |
| Grass collecting volume | - L |
| Suitable for slope up to | 8.5 ° |
| Battery type | Built-in |
| Power source | Battery |
| Charging time | 20 h |
| Battery capacity | 7 Ah |
| Battery life (max) | 120 min |
| Battery life (min) | 90 min |
| Battery technology | Sealed Lead Acid (VRLA) |
| Power consumption per month (max) | 4 kWh |
Weight and Dimensions| Depth | 530 mm |
|---|---|
| Width | 420 mm |
| Height | 260 mm |
| Weight | 7500 g |
Explains warning symbols and their meanings for safe operation of the mower.
Covers pre-operation checks, user responsibilities, and initial preparations for the mower.
Details safe operating procedures, warnings about blades, guards, and power cords.
Explains how to safely transport the mower within the working area and details battery safety precautions.
Details Child Lock and Disabling Device features for preventing unintended operation.
Covers Tilt Sensor, Obstruction Sensor, and the Emergency Stop Button for safety.
Explains GO/ON-OFF controls and the mower's dependence on Base Station and Perimeter Wire.
Lists the components included in the mower's package for setup.
Provides guidelines for selecting the optimal location for the Base Station based on power and physical constraints.
Explains how to use the RoboRuler to determine correct distances for laying the perimeter wire.
Guides on starting, laying, securing, and completing the perimeter wire installation.
Guides on positioning and securing the Base Station to the ground using supplied stakes.
Instructions for connecting perimeter wire, power, and managing the Base Station head.
Final steps to start the mower's operation and have it locate the perimeter wire for charging.
Identifies and labels the key components of the mower's exterior and bottom views.
Explains the controls and indicators on the mower's operating panel and Base Station.
Covers initial setup, powering up, child protection, starting, stopping, and charging the mower.
Describes the mobile app's capabilities for controlling and managing the mower remotely.
Outlines periodic maintenance, disabling device operation, blade replacement, and battery handling.
Provides a guide to common fault indications, special indications, and recovery steps.
Addresses common user queries regarding mower operation, quality, and border interactions.
Presents alternative methods for installing the mower's base station in internal and external corners.
Explains how to set up the mower for lawns with connected or separated secondary mowing areas.
Summarizes basic operating procedures and common status indications for the mower and perimeter wire.
To Next Page
