EasyManua.ls Logo

Robomow RX20 Pro - Secondary Area Setup

Robomow RX20 Pro
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
55
Requires
conguring starting
points via the app
(not applicable for
models under 200 m
2
/2150 ft
2
)
Appendix B
Secondary areas
Connected secondary areas
If your lawn has additional areas connected with a passage
and the mower is able to drive through it, then you should
bear in mind the following rules:
Separated secondary areas
If your lawn has areas, that are completely
separated (by a fence, sidewalk, pathway, etc.),
then you can extend the perimeter wire to
cover such secondary areas as shown in the
picture below.
• The minimal distance between the wires in such passage
should be 15 cm / 6”
• The minimal width of such passage should be 57 cm / 22”
Min 15 cm Min 57 cm
0 cm

Other manuals for Robomow RX20 Pro

Related product manuals