EasyManua.ls Logo

Robomow RX20 Pro - Battery Replacement

Robomow RX20 Pro
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
47
Battery replacement
1. Make sure the mower is not in the Base Station.
2. Power the mower off by pressing GO button for 2 seconds.
3. Remove the Disabling Device.
4. Ensure that only a replacement battery of the right type (Part No.
MRK9101A) is used.
5. Warning! Do not use a non-rechargeable battery.
6. For the orientation of the battery with regard to polarity and the
method of replacement, refer to the instructions supplied with the
replacing battery or to our online Help Center.
7. For the instructions on how to deal with a leaking battery, refer to
the “Batteries” section of the provided safety instructions.
8. Environmental protection:
a. Remove the battery from the appliance before scrapping it.
b. The battery is to be disposed of safely.
c. For additional disposal instructions see the “Product end of use”
section of the provided safety instructions.

Other manuals for Robomow RX20 Pro

Related product manuals