19
Lay the Perimeter Wire (“virtual boundary”),
which defines the working area for the mower.
Lay the
wire
Combination pliers
• Have mower’s package nearby.
• Before you start wiring, use your old mower to cut your
grass to the height no more than 6 cm (2.5”) one last time.
This will make inserting pegs easier and help ensure the
mower doesn’t cut the wire.
TIPS
A. Get to know wire distances
WHAT
YOU’LL
NEED
Cutter
Use the RoboRuler to determine a distance, which you should keep
between the Perimeter Wire and the lawn’s edge.
Hammer
To Next Page
Loading...
