Need help?Do you have a question about the Robomow MC1000 and is the answer not in the manual?
General| Mower Type | Robotic |
|---|---|
| Recommended Lawn Size | 1000 m² |
| Cutting Width | 28 cm |
| Cutting Motors Power | 200 W |
| Maximum Slope | 36% |
| Power Source | Battery |
| Typical Mowing Time | 60 min |
| Rain Sensor | Yes |
| Anti-Theft Protection | PIN Code |
| Smartphone App | Yes |
| Warranty | 2 years |
| Battery Type | Lithium-ion |
| Charging Time | 90 min |
Welcome to Robomow, its benefits, and initial product information.
Product compliance with EU directives and referenced standards.
Explanation of safety symbols found on the Robomow mower.
Key safety guidelines for operating and preparing the Robomow.
Instructions for moving the mower and using manual remote control.
General advice for upkeep and specific operational instructions.
Guidelines for battery handling, charging, and end-of-life procedures.
Security features to prevent unauthorized operation and theft.
Safety mechanisms like lift, tilt, obstruction sensors, and emergency stop.
Power cutoff switch and details on sealed, safe batteries.
List of all components and accessories provided with the Robomow.
Explanation of the boundary wire system and base station operations.
Details on automatic mowing, edge cutting, and grasscycling.
Advanced mowing modes and using the remote control.
Information on the mobile application for mower control and features.
Classifying lawns into Main Zone, Sub-Zone, or Separated Zones for setup.
Connecting multiple lawn areas with a narrow pass for Robomow.
Guidelines for handling disconnected lawn areas.
Recommendations for optimal positioning of the Base Station.
Two methods for placing the Base Station relative to the lawn perimeter.
Placing the power box and protecting lawn objects with islands.
Guidelines for laying the perimeter wire on lawn inclines.
Mowing on slopes and required wire distance from edges.
Tools, parts, and initial checks before starting setup.
Installing the power box and performing the initial battery charge.
Considering lawn layout and obstacles for wire setup.
Beginning the perimeter wire loop and laying it along edges.
Specific distances for wire placement near obstacles and edges.
Specific distances for wire near paths, pools, and water bodies.
Proper wire bending angles for left and right turns at corners.
Handling hard obstacles and creating islands for delicate areas.
Step-by-step guide for creating a narrow pass between zones.
Instructions for pegging the wire to the ground and safety precautions.
Finalizing the perimeter wire loop connection to the Base Station.
Positioning and connecting the Base Station unit.
Connecting the extension cable and the main power supply.
Determining switch placement and mounting options for non-base zones.
Procedure for setting up the perimeter wire in non-base zones.
Understanding the perimeter switch controls and status indicators.
Adjusting the blade height for optimal mowing.
Initial configuration steps for the mower's operation.
Using the control panel and setting measurement units.
Configuring the mower's internal clock and date.
Defining the size of the main mowing area for the mower.
Verifying the Base Station's location and signal strength.
Verifying perimeter wire placement and function for proper operation.
Final steps and checks after the initial setup is complete.
The mower's routine of automatic mowing and charging.
Description of the control panel indicators and their meanings.
How to start manual mowing, overriding the automatic schedule.
Choosing between edge mowing and inner area mowing.
Accessing and adjusting common mower settings.
Configuring the mower's clock, date, and mowing duration percentage.
Setting periods when the mower will not operate automatically.
Adjusting lawn size and mowing cycle frequency.
Configuring island features and other advanced settings.
Settings for wire following, rain sensor, and sensitivity.
Configuration for edge mode, child lock, and anti-theft device.
Adding, removing, and managing lawn zones and sub-zones.
Pausing automatic operation and setting sub-zone entry points.
Utilizing advanced mowing techniques for efficiency.
App settings and operating the mower without a base station.
Understanding status lights and alerts from the power box.
Buzzer control and methods to pause automatic operation.
Charging methods for during the season and winter storage.
Common error codes displayed by the mower and their meanings.
Detailed causes and corrective actions for specific error codes.
Further error analysis and specific operational issues.
Explanations for various operational messages and codes.
Interpretation of mower messages and required actions.
Troubleshooting issues with zone transitions and mower departure.
Resolving problems with cut quality and mower docking.
Causes for uneven cuts, rain delays, and operation during inactive times.
Addressing wire issues, connection problems, and mower departure codes.
Issues with setup completion and disabled operational modes.
Technical specifications and feature comparison for different Robomow models.
Basic upkeep, battery lifecycle, and disposal guidelines.
Preparing the mower for winter storage and cleaning the mowing deck.
Procedures for inspecting, replacing, and safely handling the mower blade.
How to repair or splice perimeter wires using supplied connectors.
Keeping the base area clean and storm protection measures.
List of available optional parts and their uses.
Advice on mowing frequency, height, and proper lawn watering.
Importance of a sharp blade and understanding thatch.
Details regarding the product's limited warranty coverage and exclusions.
To Next Page
