EasyManua.ls Logo

Robomow RC308 - User Manual

Robomow RC308
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Questions and Answers

Robomow RC308 Specifications

General IconGeneral
TypeRobotic lawn mower
Noise level69 dB
Cutting width28 mm
Grass catcherYes
Product colorBlack, Green
Cutting systemRotary blades
Number of blades1
Number of wheels3 wheel(s)
Recommended lawn area800 m²
Maximum cutting height60 mm
Minimum cutting height15 mm
Grass collecting volume- L
Battery typeBuilt-in
Power sourceBattery
Charging time90 h
Battery voltage26 V
Battery life (max)70 min
Battery technologyLithium Iron Phosphate (LiFePO4)
Power consumption per month (max)14 kWh
Weight and Dimensions IconWeight and Dimensions
Depth640 mm
Width460 mm
Height210 mm
Weight1140 g

Summary

Introduction and Safety

1.2 Warning Decal Definitions

Explains symbols on the Robomow and their meanings for safe operation.

1.3 Safety Warnings & Precautions

Provides essential safety guidelines for training, preparation, and operation.

Maintenance, Battery, and Disposal

Covers safety procedures, battery care, and responsible product end-of-use guidelines.

Robomow Safety Features

Know Your Robomow

2.2 How Robomow Works

Explains the basic working principle of Robomow, including perimeter wire and base station.

2.3 Robomow Key Features

Highlights key features like Edge Cutting, TurboMow, SmartMow, Remote Control, and App.

Planning Ahead

3.1.4 Separated Zone Setups & Base Station Location

Details separated zone setups and guidelines for optimal Base Station placement.

3.2 Base Station & Power Box Placement

Instructions for internal/external Base Station setup and Power Box location.

3.4 Perimeter Wire Layout Planning

Covers planning wire layout, including objects like islands and slopes.

Initial Setup

4.1 Preparations & Power Box Installation

Recommendations, tools, and steps for installing the Power Box and charging the battery.

4.2 Perimeter Wire Setup Planning

4.5 Completing Perimeter Wire Setup at Base Station

4.6 Base Station Connection & Power Box Connection

4.8 Setup in a Non-Base Zone

4.3 Perimeter Wire & Narrow Pass Setup

4.4 Fastening Perimeter Wire & Sub-Zone Starting Points

4.7 Power Box Location & Non-Base Zone Setup

4.8.1-4.8.4 Perimeter Switch Setup

Preparing Robomow

5.1 Adjust Cutting Height & One-Time Setup

Instructions for adjusting cutting height and performing the initial one-time setup.

5.2.3-5.2.5 Date;Time, Zone Area & Base Station Test

5.2.6 Test Wire Position & Post-Setup

Robomow Operation

6.1 Automatic Operation & Operating Panel Overview

Explains automatic mowing cycles and the mower's operating panel.

6.3 Manual Operation Modes

6.4 Menu Options & Basic Settings

Area Settings & Advanced Settings Overview

Near Wire Follow Settings (P003-P006)

Security & Zone Management Settings (P010-P013)

Managing Child Lock, Anti-Theft, PIN codes, and base station zone selection.

Advanced Mowing Modes & Sub-Zone Configuration (P022-P025)

Robomow App Settings & Non-Base Zone Operation

Troubleshooting and User Messages

9.1 General Error Codes

Lists common error codes and their initial probable causes.

9.2 Detailed Error Codes

Provides detailed error codes and corrective actions.

9.3 User Messages and Required Actions

9.4 Basic Troubleshooting Guide

General troubleshooting for common faults not covered by error codes.

9.4.1 No-Depart Code Descriptions

Maintenance and Storage

11.1 General Instructions & 11.2 Battery Care

11.3 Winter Storage & 11.4 Mowing Deck Maintenance

11.5 Blade Maintenance & Wire Splicing

Instructions for blade maintenance, replacement, and splicing the perimeter wire.

Related product manuals