Robomow RC308 - 4.8 Setup in a Non-Base Zone; 4.7 Power Box Location & Non-Base Zone Setup

25
EN
4.7.1 At the Power Box Location:
• Connect the DC Cable from the Power Box to
the 15 m (50 ft.) Extension Cable.
• Connect the Power Box to a regular power
outlet (230V / 120V).
) The Docking Indicator will light up if the mower is in the
Base Station.
) The Operating Indicator will light up if the mower is not in
the Base Station.
Docking Indicator
Automatic
Operation
Operating
Indicator
Wire Indicator