Robomow RC308 User Manual

35
EN
6.4.1.4 Area – Update the size of the lawn in case it has been changed.
• Press the ‘Setting’ button 4 times until the Area icon is blinking.
• Scroll to change the area and press ‘OK’ to conrm.
• If more than one zone is dened, then rst scroll to select the zone you want to edit and set the area
for that zone as described above.
Names of zones are as follows:
L1 – Main Zone
L2 – Separated Zone A
L3 – Separated Zone B
A1 – Sub-Zone 1
A2 – Sub-Zone 2
A3 – Sub-Zone 3
A4 – Sub-Zone 4
6.4.2 Advanced Settings
The Advanced Settings are additional menu options that are not changed very often and thus are not included
in the Basic Settings.
• To change any option/feature in the Advanced Settings, press the ‘Settings’ button continuously for 3 Sec.
• Menu ‘P001’ is displayed. Use the arrows to scroll to the setting you want to change, and then press OK.
• Use the arrow button to change the setting and press OK to conrm.
• Scroll to change additional menu options or press STOP to go back to the main display.
Below are the Advanced Settings options:
Screen Seng Descripon Opons
P001
Mowing
Frequency
(Default =
2)
• Controls the frequency of mowing cycles in a particular
zone of your lawn.
• The default mowing frequency is Medium (equivalent to two
mowing cycles in a week). It means that Robomow will complete
the entire mowing of your lawn twice a week.
• The numbers in the menu represent the following values of
mowing frequency:
1 – LOW (one mowing cycle in a week)
2 – MEDIUM (two mowing cycles in a week)
3 – HIGH (equivalent to daily mowing)
• The ‘Mowing Frequency’ option is only available for zones where a
base station is installed. If you have dened at least one seprated
zone with a base station (see menus P013 and P014), then you
will be prompted to select the relevant zone before changing the
setting (L1 stands for the Main Zone, L2 stands for Separated
Zone A, etc.)
• During off-season when the growth rate of the grass is slower,
it is recommended to change the Mowing Frequency to ‘LOW’.
This resting period helps the grass and prolongs the lifetime of
the mower.
• Grass growth rate changes during the year (depending on
temperature, grass type, fertilizing etc.).
• High fertilization and favorable weather conditions may cause the
grass to grow faster. In such cases, set the ‘Mowing Frequency’
option to High.
1/2/3
P002
Islands (Default =
OFF)
• In case there is a large perimeter island (a swimming pool, a pond, a
large ower bed, etc.) in a particular zone, it is recommended to set
this setting to On. This will prevent the mower from following the wire
around such island, while returning to the Base Station.
• When the Islands feature is set to On, the mower will execute a
special method of searching for the Base Station. As a result it may
take the mower more time to arrive to the Base Station.
• See also menu P006 below.
On/OFF

Robomow RC308 Specifications

General

Type	Robotic lawn mower
Noise level	69 dB
Cutting width	28 mm
Grass catcher	Yes
Product color	Black, Green
Cutting system	Rotary blades
Number of blades	1
Number of wheels	3 wheel(s)
Recommended lawn area	800 m²
Maximum cutting height	60 mm
Minimum cutting height	15 mm
Grass collecting volume	- L
Battery type	Built-in
Power source	Battery
Charging time	90 h
Battery voltage	26 V
Battery life (max)	70 min
Battery technology	Lithium Iron Phosphate (LiFePO4)
Power consumption per month (max)	14 kWh

Weight and Dimensions

Depth	640 mm
Width	460 mm
Height	210 mm
Weight	1140 g