Robomow RC306 Original Operating Instructions

50
12. Accessories
Blade (Part No. MRK7003A)
Keep a spare blade on
hand.
A sharp blade is important
for safety and best cutting
performance.
Battery
(Part No. MRK7005A)
Used to replace the
existing battery and
refresh cutting capacity.
Perimeter Wire
(Part No. MRK0014A)
For larger lawns or
additional zones.
Peg Pack
(Part No. MRK0012A)
Used to fasten the
Perimeter Wire to the
ground.
For larger lawns or
additional zones.
Wire Repair Connectors
(Part No. MRK0039A)
Used for repairing or
splicing wires.
Plot Connectors
(Part No. MRK0038A)
Used for connecting the
Perimeter Wire to the
Base Station or Perimeter
Switch.
Base Station and
Power Box
(Part No. MRK7006A)
Used for:
◦ Enabling multiple
mowing cycles in a
Separated Zone
Remote Control
(Part No. MRK7100)
Used to Manually drive
and mow anywhere.
Includes a Safety
function to prevent
accidental use.
Perimeter Switch
(Part No. MRK5002C)
For zones that are not
connected to the Base
Station.
Batteries Pack for
Perimeter Switch
(Part No. MRK5006A)
Preferable for areas where
electricity is not available
or not close enough to the
Perimeter Switch
Robomow App
Enables friendly an
intuitive operation of your
Robomow and opens
more menu options and
features, which are not
available through the
mower Operating Panel.
GSM Module
(*)
(Part No. MRK6100A)
Enables remote
alerts through the
Robomow App
(for all RC and TC
models).
(*) Not available in all markets

Robomow RC306 Specifications

General

Type	Robotic lawn mower
Cutting width	280 mm
Cutting system	-
Recommended lawn area	600 m²
Maximum cutting height	60 mm
Minimum cutting height	15 mm
Grass collecting volume	- L
Battery type	LiFePO4
Power source	Battery
Charging time	1 h
Battery voltage	26 V

Weight and Dimensions

Depth	460 mm
Width	630 mm
Height	210 mm
Weight	11400 g