Robomow TC300 User Manual

7
EN
2. Know Your Robomow
®
2.1 What’s in the Box
1 Robomow® 7
RoboRuler Used for seng the distance of the Perimeter
Wire from the lawn edge.
2 Wire Pegs Used for securing the wire to the ground. 8
Base Staon
Used by Robomow to dock and charge when
it is not mowing.
3
Perimeter Wire
Used to create a virtual wall for your
Robomow
9
Base Staon Stakes
Used for securing the Base Staon
to the ground
4 Operang & Safety Manual 10 Extension Cable 15 meters (50 .), (Low voltage cable)
5 Wire Connectors Used for splicing wires (as needed) 11
Power Box
Used to deacvate (halt) the automac operaon mode
and reacvate it as needed. Also provides indicaon
of Robomow’s status (Docking or Operang) and the
Perimeter Wire’s health.
6
Plot Connectors
Used for connecng the Perimeter Wire
to the Base Staon
12
Power Box Mount
Used for xing the Power Box to a
wall (including Screws and dowels).
Operating & Safety Manual
12
11
10
9
8
6
5
7
4
3
1
2

Robomow TC300 Specifications

General

Brand	Robomow
Model	TC300
Category	Lawn Mower
Language	English