Troubleshooting
(UURU0DNHVXUHWKDWWKH)LOWHULV
dry or clean the Filter.
Error 17: Side Brush module error.
Reset the system.
(UURU9DFXXPIDQHUURU5HVHWWKH
system.
The Filter is not completely dry. Dry the Filter for at least 24 hours. The Filter may also
EHEORFNHGDQGUHTXLUHFOHDQLQJ,IWKHSUREOHPSHUVLVWVUHSODFHWKH)LOWHU
7KH6LGH%UXVKLVH[SHULHQFLQJDIDXOW5HVHWWKHV\VWHP
7KHYDFXXPIDQLVH[SHULHQFLQJDIDXOW5HVHWWKHV\VWHP
(UURU&OHDQWKH0RWLRQ7UDFNLQJ
Sensor and place the robot back
where it stopped.
7KH0RWLRQ7UDFNLQJ6HQVRUPD\EHGLUW\8VHDGU\FORWKWRZLSHWKH6HQVRUWKHQ
place the robot back where it stopped before restarting.
Error 12: The battery is too low.
Recharge before use.
Low battery. Recharge before use.
(UURU&KDUJLQJHUURU&OHDQWKH
charging contacts.
Use a dry cloth to clean the Charging Contacts on the robot and on the Charging Dock.
Error 14: Battery error. The battery temperature is either too high or too low. Wait until it returns to normal.
Error Solution
(UURU&OHDQWKH'RFN/RFDWLRQ
Beacon.
The Dock Location Beacon is dirty. Wipe it clean.
Internal error. Reset the system. 0DOIXQFWLRQGXHWRDQLQWHUQDOHUURU5HVHWWKHV\VWHP