FAQs
The robot has started missing certain spots The Obstacle Sensor may be dirty. Clean it with a soft dry cloth.
No or little water during mopping
Please check whether there is water in the water tank, rinse the mopping cloth, replace the
ࢉOWHURUIROORZWKHLQVWUXFWLRQVLQWKHXVHUPDQXDOWRFRUUHFWO\LQVWDOOWKHPRSSLQJFORWK
Too much water during mopping 3OHDVHPDNHVXUHWKDWWKHZDWHUWDQNFRYHUDQGWKHࢉOWHUDUHSURSHUO\LQVWDOOHGLQSODFH
Problem Solution