EasyManua.ls Logo

Roborock Q7 Max - Basic Parameters; Robot Specifications; Charging Dock Specifications

Roborock Q7 Max
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
C7
Robot Sensors
Use a soft, dry cloth to wipe and clean all
sensors, including:
C7-1—Dock Locator
C7-2—Wall Sensor
C7-3—Four Cli Sensors
*
Clean monthly
C8
Charging Contact Areas
Use a soft dry cloth to wipe the charging
contacts on the charging dock and the robot.
*
Clean monthly
Purchase an additional lter and alternate if
necessary.
Note:
C6
Mop Cloth
*
Clean after each use and replace every 3-6 months
Remove the mop cloth from mop cloth
mount. Clean the mop cloth and air-dry it.
A dirty mop will aect the mopping performance.
Clean it before use.
Note:
Battery
The robot is equipped with a high-performance
lithium-ion rechargeable battery pack. To
maintain battery performance, keep the robot
charged during normal use.
If the robot will be left unused for a long period,
turn it o and charge it at least every three months to
avoid battery damage caused by over-discharge.
Note:
Basic Parameters
Robot
Q380RRModel
14.4V/5200mAh
lithium-ion battery
Battery
Approx. 3.7kg (8.16 lbs)Weight
The serial number is on a sticker on the underside
of the robot.
Note:
< 6 hoursCharging Time
20VDC 1.2ARated Input
Charging Dock
14.4V/5200mAh
lithium-ion battery
Charging Battery
CDZ11RR or CDZ12RRModel
28WRated Power
100-240V~Rated Input
20VDC 1.2ARated Output
50-60HzRated Frequency

Related product manuals