Routine maintenance
2. Fill the dustbin with clean water and close the cover. Gently
shake the dustbin, then pour out the dirty water.
Note: Only use fresh water without cleaning liquid.
3. Remove the filter and clean it with water.
4. Rinse repeatedly and tap the filter frame to remove as much
dirt as possible.
The robot is equipped with a high-performance lithium-ion
rechargeable baery pack. To maintain baery performance,
keep the robot charged.
Baery
Note: If the robot is to be le unused for an extended period, turn it off before
storage and charge it at least once every three months to avoid baery damage
resulting from over-discharging.
* Monthly cleaning recommended
Use a so dry cloth to clean the charging contacts of the charging dock.
Charging dock
Note: To avoid damage, do not touch the surface of the filter with hands,
brushes, or sharp objects.
Clean the filter * Bi-weekly cleaning is recommended
Note:
5. Leave the filter to dry before reinstalling it.
Allow the filter to dry thoroughly before use. 24-hours of drying is recommended.
Alternating between two filters is recommended.
22
To Next Page
Loading...
Need help?
General
