Roborock S7+ - Sensor and Battery Maintenance

031
VibraRise Mop Cloth
1. Remove the VibraRise mop cloth from the VibraRise mop cloth
mount.
2. Clean the VibraRise mop cloth and air-dry it.
Note: A dirty VibraRise mop cloth will aect mopping performance. Always start with a
clean cloth.
Robot Sensors
Use a soft dry cloth to wipe and clean all sensors, including:
1. The dock locator.
2. The wall sensor.
3. The carpet sensor.
4. The six cli sensors.
Routine Maintenance
Dock Locator
Wall Sensor
Carpet Sensor
Cli Sensors
Battery
The robot is equipped with a high-performance lithium-ion
rechargeable battery pack. To maintain battery performance, keep
the robot charged.
Note: If the robot will not be used for an extended period, turn it o and charge it at least
every three months to avoid battery damage caused by over-discharging.