Roborock S8 Pro Ultra User Manual

04
Safety Information
Battery and Charging
• Keep the charging dock away from heat (such as radiators).
• Do not wipe the charging contacts with wet cloth or wet hands.
• Turn the robot off and use original packaging for shipment.
• If placing the robot into storage, charge it fully and turn it off before placing it in a cool dry place. Recharge it at least
every three months to prevent the battery over discharging.
• Do not use the product when the temperature is higher than 40°C (104°F) or lower than 4°C (39°F), or there is any liquid
or sticky substance on the floor.
Grounding methods
GROUNDED OUTLET
GROUNDING PIN
GROUNDED OUTLET BOX
ADAPTER
METAL SCREW
TAB FOR GROUNDING
SCREW
AA200
(A)
(B)
(C)
This appliance is for use on a nominal 120-V circuit and has a grounding attachment plug that looks like the plug illustrated
in sketch A in Grounding methods. Make sure that the appliance is connected to an outlet having the same configuration as
the plug.
No adaptor should be used with this appliance.
International Symbols Explanation
~ – ALTERNATING CURRENT symbol [symbol IEC 60417-5032 (2009-02)]
– DIRECT CURRENT symbol [symbol IEC 60417-5031 (2009-02)]
– PROTECTIVE EARTH (Protective Ground) symbol [symbol IEC 60417-5019 (2009-02)]

Roborock S8 Pro Ultra Specifications

General

Shape	Round
Product color	Black
Remotely operated	Yes
Dust container type	Bagless
Brush type	Roller brush
Noise level	67 dB
Frequency band	2.4 GHz
Navigation type	Laser Distance Sensor (LDS)
Integrated sensors	Laser
Water tank capacity	0.2 L
Dust capacity (total)	0.35 L
HEPA filtration system	-
Package type	Box
Package depth	515.62 mm
Package width	538.48 mm
Package height	485.14 mm
Package weight	19096.24 g
Suction power	6000 Pa
Battery capacity	5200 mAh
Power consumption (typical)	69 W

Weight and Dimensions

Depth	353 mm
Width	350 mm
Height	96.5 mm
Weight	14107 g
Base station dimensions (W x D x H)	426 x 514 x 450 mm