EasyManua.ls Logo

RoboSea BIKI - Page 19

RoboSea BIKI
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Film: click “ ”and change it to“ ”then click“ ”to film a video.
Press “ ”to stop recording.
Review& Share
Settings
Click “ ”on the real-time control page to review the photographs
and films that have been captured. Long press the photograph to
delete it or process bulk download. The download list is on the
upper right corner; click the thumb of the list to pause download;
long press it to delete.
The downloaded photographs can be reviewed in the photo
album on the home page. Click the photograph to review. Click
”on the lower right corner to activate the image editor and
share it to social media.
Customize BIKI’s settings in“ ”.
Device info: the name and password of the Wi-Fi can be modified
in this section.
Barcode on the unit: is for serial number check.
Activate/deactivate acoustic control or smart obstacle avoidance:
when delivery, the acoustic control is ON while the smart obstacle
avoidance function is OFF. You can modify the settings as needed.
Calibration: Calibration is required (please put BIKI on a flat and
level place, click “confirm” to calibrate. Calibration begins when
head light keeps flickering) when BIKI shows abnormalities in the
water such as leaning to one side, turning upwards, or keeping
turning round on the way back to the base, unable to return to the
original point. Fail to do calibration BIKI may work with incorrect
posture, thus influence the experience of the product. Moreover,
long-time leaving it uncalibrated will do a greater influence to BIKI.
CAUTION:
Please disconnect BIKI’s Wi-Fi before uploading
and get connected to other networks.

Other manuals for RoboSea BIKI