EasyManua.ls Logo

RoboSea BIKI - 6. About the APP Features; Memory Path; Smart Return-to-Base; Floodlight

RoboSea BIKI
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.About the APP Features
Memory Path
Smart Return-to-Base
Floodlight
Camera/Film
Click “ ” and the system will automatically memorize its moving
path on the water; click “ ”to stop recording and save path; click
“ ”to re-operate the previous saved path; click “ ” to start
memorizing a new path.
CAUTION:
GPS is only available for outdoor use. It can be
better performed when weather condition is good.
13
Return to base with one key: When the WI-FI connection works
properly and GPS signal is good, with one key, BIKI is able to plan
path by itself and return to user’s location. If four or more satellites
are found on the real-time page, click “ ” to receive GPS at
real-time. BIKI is ready to return when it prompts “return-to-base is
good to go”.
Return to base when unconnected: The system, when BIKI is
disconnected from Wi-Fi and GPS signal is good, will deem that BIKI
is lost. And this time, BIKI will return to the base according to the
latest recorded GPS. Fail to click “ ” after startup, BIKI will mark
the spot from where it goes into the water as original location as
default.
There are two lumens on the head of BIKI which are equipped for
producing light while capturing photo/film in the water. There are
two options (high/low). Click “ ”on the real-time control page to
turn on the spotlight. “ ”refers to low light while “ ”to high light.
The built-in 16 mega pixels camera with a large aperture of ƒ2.0 is
capable of capturing 4K/30fps videos and taking photographs with
16 mega pixels.
Camera: click “ ”and change it to“ ”then click“ ”to capture
photograph.
two options (high/low). Click “ ”on the real-time control page to
turn on the spotlight. “ ”refers to low light while “ ”to high light.

Other manuals for RoboSea BIKI