RoboSea BIKI - 2. About the Controller

2.About the Controller
How to Fix/Remove the Caudal Fin
BIKI, a consumer-used RoboFish launched by RoboSea, is built
on the basis of bionics and hydromechanics theory, with the box
fish native to reef zone as its design model. The power of BIKI is
produced by the bionic caudal fin; its streamlined body is small
and cute. Not only is BIKI capable of taking photos/videos in the
water, it’s also featured with tech highlights such as modularized
design, smart obstacle-avoidance, eccentric pan & tilt head and
GPS return-to-base.
The removable design of the caudal fin makes BIKI portable.
1. To fix it, please fit the caudal fin to the tail connecting link, push it
in and rotate it in any direction by 90°.
2. To remove it, please push the caudal fin in, rotate it by 90°and
take it out.
[1] Wakeup/Speedup
[2] Slowdown
[3] Turn Left
[4] Turn Right
[5] Camera/Turn On/
Adjust/Turn Off
[6] Start/Stop Filming
[7] Pilot Light
[8] Go Up
[9] Go Down
[10] Rubber Plug
for Charging Port
[11] Rope Hole
CAUTION:
Please make sure BIKI is powered off when
fixing/removing the caudal fin.
[1]
[2]
[5]
[3]
[4]
[7]
[8]
[9]
[10]
[11]
[6]
9
design, smart obstacle-avoidance, eccentric pan & tilt head and