Modify Wi-Fi Name and Password
Path Customizing
Smart Obstacle-Avoidance
this feature can be found in the “Draw a route” drop-down list on
the real-time control page. With this feature, BIKI can move as
the path planned in advance. During this process, BIKI will
capture HD video and save it into the memory and you can
check the video when the process is complete or review it in the
photo album.
1. Choose the paths in the system or plan the path by yourself. To
customize the path, you need to use one continuous line to make
any kind of graph in the drawing zone. Once it’s done, you can
choose to save it.
2. Put in a diving depth which is available from 0-6000cm.
How to Use It
1. Click “device info” in “ ” section, then put the new name
and password in, and click “complete”. As the updated info is
not in accordance with the existing one, the Wi-Fi will get
disconnected and the APP will jump to the network page.
2. Click “ ”on home page, and get connected to
the Wi-Fi with updated name.
3. Once Wi-Fi connection is completed, it will jump to the
real-time control page which means the Wi-Fi is well-conneted.
CAUTION:
this feature may fail to perform normally in turbid
water areas, thuscause the malfunction. Please
turn this feature off before put it in the water.
16
The built-in infrared sensor is capable of sensing obstacles
7-35cm away, thus effectively reduce the risk of collisions when
operated in some complex environment. You can turn on/off the
smart obstacle-avoidance feature in “ ” section.
To Next Page
Loading...
