Robustel EG9012 User Manual

Robustel EG9012 User Guide
RT_UG_EG9012_v.1.0.1 2 June, 2017 11/22
Confidential
1.2 Package Contents
Before installing your EG9012 Gateway, verify the kit contents as following.
Note: The following pictures are for illustration purposes only, not based on their actual sizes.
 1 x Robustel EG9012 KONE Connection 210 (North America)
 35 mm DIN rail mounting kit
Note: If any of the above items is missing or damaged, please contact your Robustel sales representative.
1.3 Specifications
Cellular Interface
 Standards: W-CDMA/FDD-LTE/TDD-LTE
 W-CDMA: max. 14.4Mbps/5.76Mbps (DL/UL)
 FDD-LTE: max. 100/50 Mbps (DL/UL)
 TDD-LTE: max. 100/50 Mbps (DL/UL)
 SIM: 1 (3V & 1.8V)
 Antenna interface: SMA female (ANT1+ANT2)
Ethernet Interface
 Number of ports: 2 x 10/100 Mbps (LAN1+LAN2)
 Magnet isolation protection: 1.5KV
Serial Interfaces
 Number of ports: 2 x RS-232, 1 x RS-485
 Baud rate: 300bps to 57600bps
 RS-232: Tx, Rx, GND
 RS-485: A (Data+), B (Data-)

Robustel EG9012 Specifications

General

Brand	Robustel
Model	EG9012
Category	Gateway
Language	English