Robustel EG9012 User Manual

Robustel EG9012 User Guide
RT_UG_EG9012_v.1.0.1 2 June, 2017 17/22
Confidential
2.4 Insert or Remove SIM Card
Be sure to insert a SIM card before you use the gateway.
Insert or remove the SIM as shown in the following steps.
 Inserting SIM Card
1. Power off the gateway.
2. Use a pointed stick to press the Push Button, and then take out the SIM Card Tray.
3. Place the SIM card on the tray, and insert them to the slot until you hear “a cracking sound”.
 Removing SIM card
1. Power off the gateway.
2. Press the Push Button, and the tray with SIM card will pop up to be pulled out.
Note:
1. Don’t touch the metal surface of the SIM card in case information in the card is lost or destroyed.
2. Don’t bend or scratch your SIM card. Keep the card away from electricity and magnetism.
3. Make sure to disconnect the power source from your gateway before inserting and removing your SIM card.

Robustel EG9012 Specifications

General

Brand	Robustel
Model	EG9012
Category	Gateway
Language	English