Robustel GoRugged M1000 Quick Guide

7 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Robustel GoRugged M1000 USB Quick Guide

RT_QG_M1000 USB _v.1.0.0 25.01.2014 1 /7

Robustel GoRugged M1000 USB Quick Guide

Chapter 1. Interface Introduction

1.1 Overview

1.2 LED Indicators

After inserting the SIM card into the modem and power on, the LED indicator’s status should be as follow when work

normally:

Name

Function

NET

Registered to the network: 75 ms on / 3 s off

Note

：

Please refer to Robustel GoRugged M1000 USB User Guide to get more details about the LED indicators.

1.3 USB Interface

USB Cable connector (Type A Male to Type A Male)

USB 2.0 Connector

PIN

Description)

1

VCC

2

Data (D-)

3

Data (D+)

4

GND

Table of Contents

Other manuals for Robustel GoRugged M1000

User Guide85 pages

Quick Start Guide7 pages

Questions and Answers:

J
Jason RayAug 2, 2025
What to do if I am receiving a 'No Carrier' message on my Robustel Modem?
- Z
  zpetersonAug 2, 2025
  If you are receiving a 'No Carrier' message, several factors could be at play. First, make sure that the semicolon (;) is entered immediately after the phone number in the AT command, for example: ATD123456;. Also, verify if the SIM card is configured for data/fax calls, and if necessary, ask your network provider. Finally, confirm that the selected bearer type is supported by both the called party and the network. If unsuccessful, attempt to select the bearer type using the AT command: AT+CBST=0,0,3.
J
Joel SantanaAug 13, 2025
How to fix Robustel GoRugged M1000 Modem's LED if it does not light up?
- D
  Diane JacksonAug 13, 2025
  If the modem’s LED does not light, verify that the modem is properly connected to a 9 to 36VDC power supply. Also, ensure that the power connector is fully and correctly inserted.
M
Michael WilsonAug 21, 2025
What to do if there is no connection with Robustel GoRugged M1000 through serial link?
- T
  Travis CrossAug 21, 2025
  If you have no connection with the modem through a serial link, check that the serial cable has been connected properly. Ensure that the serial cable has been made by following the pin assignment. Check if your program has the proper settings. Also, check if another program is interfering with the communication program, such as a conflict on communication port access.

Robustel GoRugged M1000 Specifications

General

Model	GoRugged M1000
Category	Modem
Max Download Speed	150 Mbps
Max Upload Speed	50 Mbps
SIM Slots	1
Ethernet Port	1 x 10/100 Mbps
Antenna Connector	SMA
Power Input	9-36 VDC
Weight	300 g
Connectivity	4G LTE
LTE Bands	B1, B3, B5, B7, B8, B20, B28
Interface	RS232, Ethernet, USB
Power Supply	DC

Related product manuals

Preview: Robustel GoRugged M1000 Pro V2

Robustel GoRugged M1000 Pro V2