Robustel GoRugged R2000 - Dimensions; Selection and Ordering Data

Robustel GoRugged R2000 Quick Guide
RT_QG_R2000 _v.1.0.0 07.09.2015 13/16
2. If R2000 fail to obtain IP from ISP, please check the cellular setting. Go to tab Interface->Cellular->WWAN1, click
.
Switch button to “OFF”, disable Automatic APN Selection. And then enter the user name and password which were
provided by the ISP. Click & to make the configuration effect. Check the WAN status
again.
3.5 Change the IP of router
There are two LANs for Ethernet to choose: lan0 and lan1. The lan0’s default IP is 192.168.0.1, and the IP of lan1
default null.
Eth0 and Eth1 default be the lan0, it means that both of Eth0 and Eth1’s IP is 192.168.0.1.
Configure lan0
Go to Interface->LAN tab, modify the IP and Netmask of lan0. And then click and to
make the modification take effect.
Note: If you want to add the multiple IP to lan0, please click in the Multiple IP Setting frame to add.