Robustel GoRugged R2000 - Check the Network Connection

Robustel GoRugged R2000 Quick Guide
RT_QG_R2000 _v.1.0.0 07.09.2015 12/16
If the IP of R2000 is forgot, how to do?
1. Press the “RST” button to restore the router to factory default configuration, then login R2000 with the IP:
“192.168.0.1”. (Reset process please refer to Interface Introduction->Reset button section)
3.4 Check the network connection
1. Go to tab “Status”, check the cellular WAN information.
In this time, router had obtained the IP from ISP, just like the screenshot above. It means Router can access internet
successfully.