Robustel GoRugged R2000 Quick Guide
RT_QG_R2000 _v.1.0.0 07.09.2015 14/16
Configure lan1
Go to the Interface->Ethernet tab
click to configure eth0 or eth1. Choose lan1 as the port assignment, click and
to make the modification take effect.
Note: lan1 is available only when it was chosen by Eth0 or Eth1 in Interface->Ethernet tab.
If you want to add the IP to lan1, go to Interface->LAN tab
click in the Multiple IP Setting frame. And select the Interface type as lan1, enter the IP and netmask, click
and to make the modification take effect.
To Next Page
Loading...
