To Next PageTo Next Page
Need help?Do you have a question about the Roca AVO-507F-AG and is the answer not in the manual?
Check unit upon reception for damage, ensure qualified installation, and follow safety regulations.
Install directly outdoors on a stable base with adequate air circulation and access space.
Ensure leakproof connections, use short, insulated copper tubing, and maintain specified diameters.
Eliminate air/moisture, perform vacuum tests, and adhere to operating temperature and voltage limits.
Install drain with slope, ensure leak-free joints, insulate, and secure tubing properly.
Verify water flow and absence of leaks after installation and before furnishing.
Check voltage, use correct cables, ensure proper grounding, and keep cables away from moving parts.
Connect wall remote control unit signal cables to the indoor unit board, avoiding interference.
Clean air filter regularly and disconnect power before cleaning the unit.
Check air intakes/outlets, grounding, and filter installation before/after seasons.
General