To Next PageTo Next Page
Need help?Do you have a question about the Roca BCH-15 and is the answer not in the manual?
Describes the compressor type, oil heater, suction accumulator, and suction exchanger.
Provides cooling and heating capacities, consumption, and test conditions for different models.
Outlines the steps for connecting power, auxiliary lines, and thermostats before unit startup.
Presents a table of electrical characteristics, including power supply, consumption, and circuit breaker sizes.
Explains the meaning of LED indications for compressor delay, dirty filters, and self-diagnosis.
Describes the sequence of operations for the summer (cooling) mode, including thermostat activation and fan control.
Illustrates the refrigerant circuit for the summer cooling cycle.
Explains the sequence of operations for the winter (heating) mode, including auxiliary heater activation.
Illustrates the refrigerant circuit for the winter heating cycle.
Describes the thermostat's design for precise temperature control and information display.
Explains how to start up the unit using the thermostat controls.
Details the functions of the thermostat's buttons for mode, fan speed, and day/night selection.
Explains how to select and operate the cooling mode using the thermostat.
Details how to select and operate the heating mode using the thermostat.
Explains how to activate emergency heating mode.
Provides instructions for cleaning the air filters regularly.
Advises on cleaning the outdoor coil to prevent dirt accumulation.
Diagram illustrating the power distribution for BCH-7, 230.1.50 model.
Diagram illustrating power distribution for BCH-10, 12, 15, 230.3.50 models.
Diagram illustrating power distribution for BCH-20, 230.3.50 model.
Diagram illustrating power distribution for BCH-25, 30, 230.3.50 models.
Diagram illustrating power distribution for BCH-10, 12, 15, 400.3.50 models.
General