Need help?Do you have a question about the Rock Shox REBA and is the answer not in the manual?
Details the scope and duration of SRAM's product warranty for materials and workmanship.
Explains how local laws can affect warranty rights and disclaimers specific to consumer protections.
Defines SRAM's liability for direct, indirect, special, incidental, or consequential damages.
Lists conditions under which the warranty is not applicable, including misuse and improper installation.
Identifies specific parts considered subject to normal wear and tear and not covered by warranty.
Diagram and labels for the fork's air shaft assembly components.
Diagram and labels for the fork's compression damper assembly components.
Diagram and labels for the fork's rebound damper assembly components.
Steps to properly prepare the bicycle component before beginning service procedures.
General guidelines and initial steps for performing service on RockShox products.
Lists specific tools required for servicing RockShox suspension components.
Lists general tools needed for bicycle maintenance and repair.
Lists the necessary lubricants and suspension fluids for the service procedures.
Lists personal protective equipment and safety items for use during servicing.
Chart to log fork settings, including date, air pressure, and adjustment clicks.
Specifies required torque values for various fork components during assembly.
Details the correct oil volume and height specifications for different fork models.
General| Brake Compatibility | Disc |
|---|---|
| Travel | 80mm - 120mm (varies by model) |
| Wheel Size Compatibility | 26", 27.5", 29" |
| Damper Type | Motion Control |
| Spring Type | Solo Air |
| Steerer | 1 1/8" Straight or Tapered |
| Axle | 15mm Thru-Axle (varies by model) |
| Crown Material | Aluminum |
| Upper Tube Material | Aluminum |
| Adjustments | Rebound, Lockout, Air Pressure |
| Type | Suspension Fork |
To Next Page