Need help?Do you have a question about the Rock Shox reverb a2 and is the answer not in the manual?
Steps to prepare the component before servicing.
General guidelines for performing service tasks.
Visual identification of the Reverb A2 model.
Visual identification of the Reverb B1 model.
Recommended maintenance intervals for Reverb A2.
Recommended maintenance intervals for Reverb B1.
Section to record past service dates.
How to identify and record brass key sizes.
Inventory of items needed for service.
Essential safety precautions during service.
Visual breakdown of the seatpost assembly.
Visual breakdown of individual components.
Steps to detach the seatpost from the bike.
Disconnecting the remote lever and hydraulic hose.
Steps to remove the lower post section.
Steps to install the lower post section.
Steps to install or replace brass keys.
Procedure for pressurizing the seatpost's air chamber.
Replacing top cap and seal head bushing.
Removing inner shaft and seal head assembly.
Steps to remove the poppet valve.
Disassembling the upper post.
Installing the new top cap assembly.
Assembling the inner shaft components.
Installing the IFP into the upper post.
Installing the inner shaft into the seatpost.
Installing the poppet valve assembly.
Replacing the remote lever hose barb if damaged.
Mounting the serviced seatpost onto the bicycle.
Installing the hydraulic hose and remote lever.
General| Brand | Rock Shox |
|---|---|
| Model | reverb a2 |
| Category | Bicycle Accessories |
| Language | English |
To Next Page