To Next PageTo Next PageWhat to do if my Rocket Coffee Maker is not starting?
If your machine isn't starting, first, check that the main switch is in the ON position. Second, ensure that the plug is properly inserted into the outlet.
What to do if my Rocket Appartamento has water leaking from the portafilter?
If water leaks from the portafilter, inspect the head gaskets for visible wear. If they appear worn, they need replacement.
How to fix irregular steam dispensing from my Rocket Coffee Maker?
To fix irregular steam dispensing, make sure the sprayer holes are clean.
Why is my Rocket Appartamento Coffee Maker extraction too slow?
Several factors can cause slow extraction. Check if the filter basket isn't overfilled with coffee, and ensure the grind isn't too fine. Also, inspect the shower foil for blockages; back-flush or clean it if necessary. Finally, verify the handle spout isn't blocked with rancid coffee oil; if so, soak it in an espresso head cleaning solution.
What to do if my Rocket Coffee Maker espresso tastes bitter?
A bitter taste can result from a too-slow extraction. Ensure the grind isn't too fine and adjust it to be coarser. Also, the machine may be dirty. Backflush and clean the unit head, portafilters, and filter baskets.
Why is my Rocket Appartamento Coffee Maker espresso watery and thin?
A watery and thin espresso suggests the extraction is too fast, resulting in pale cream. Verify that the grinding isn't too coarse and correct it to a finer setting.
Why is my Rocket Coffee Maker espresso too cold?
If your espresso is too cold, ensure the cups are sufficiently heated by rinsing them with hot water before extraction. Also, avoid drawing too much water from the unit head between extractions to maintain the machine's temperature.
What to do if my Rocket Appartamento Coffee Maker has no coffee or steam dispensing?
If there's no coffee or steam dispensing, first, check if there's water in the tank. Second, ensure that the coffee and steam controls are activated before dispensing.
Why is my Rocket Appartamento milk thin and bubbly?
Thin and bubbly milk can occur if the milk isn't diluted gradually, causing large bubbles to form. Also, ensure the steam comes out with the right pressure and that there are no blocked nozzles. Finally, avoid using reheated milk; use fresh milk instead.
Why is my Rocket Coffee Maker espresso bubbly?
Espresso can be bubbly if the water in the machine is too hot; let some water flow from the unit head before another extraction. It may be due to excessive use of the unit head or steam wand; allow the machine time to recover pressure. The steam wand may also be clogged with dry milk; remove the nozzle and clean it.
General| Boiler Type | Heat Exchange |
|---|---|
| Boiler Material | Copper |
| Water Reservoir Capacity | 2.5 liters |
| Power | 1200 W |
| Type | Semi-Automatic Espresso Machine |
| Boiler Capacity | 1.8 liters |
| Case Material | Stainless Steel |
| Pump Pressure | 15 bar |
| Water Tank Capacity | 2.5 liters |
| PID Temperature Control | No |
| Steam Wand | Yes |
| Hot Water Dispenser | Yes |
| Portafilter Size | 58 mm |
| Pump Type | Vibration |
| Dimensions | 274 mm x 425 mm x 360 mm |
| Voltage | 110-120 V or 220-240 V |
Lists critical safety precautions for operating the machine.
Details the necessary conditions and steps for machine installation.
Explains how to prepare coffee and dispense steam/water.
Details how to access and modify machine parameters.
Explains alarm indicators and provides solutions for common issues.
Details the necessary conditions and steps for machine installation.
Explains how to install the portafilter and start dispensing coffee.
Covers choosing portafilters, filling with coffee, and starting extraction.
Details the procedure for restoring all parameters to factory defaults.
Solutions for issues related to the machine not starting or dispensing coffee/steam.
