6
Status indicators
Using the hard drive enclosure
Installing your hard drive in the enclosure
Read these safety precautions before you install your hard
drive in the enclosure:
• Use only the accessories provided in the accessory
package.
• Always unplug the AC adapter before installing the hard
drive.
• Do not use a power supply with a different voltage
rating.
• Make sure that you first touch an unpainted, grounded
metal object to discharge any static electricity stored on
your clothing or body before touching any electronic
components.
• Handle the printed circuit board (PCB) edges only. Avoid
touching the onboard electronic components.
Operation
mode
Led Description
Starting mode Solid The hard drive is turned on.
Active mode Flashing Data is being transmitted between your
computer and the hard drive.
Disconnect mode Off The hard drive is turned off.
09-0772 RF-AHD25_MAN_ENG_V3.fm Page 6 Monday, October 12, 2009 10:55 AM
To Next Page
Loading...
