15
RF-RBKIT
To replace the battery:
1 Press the battery tray lock to the right, then slide out the battery tray. You
can remove the battery door with your fingernails by using the spaces
set back in the remote control.
2 Match the polarity on the lithium cell with a plus sign (+) on the battery
tray.
Replace the battery with a CR2025 or equivalent.
3 Slide the tray with the new battery into the battery compartment until it
clicks into place.
Warnings:
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type of battery.
RF-RBKIT_10-1157_MAN_V4.fm Page 15 Friday, October 8, 2010 12:53 PM
To Next Page
Loading...
