18
Wireless Surround Sound for 7.1-channel home theater
This example shows how to wirelessly connect your rear and side
surround sound home theater speakers (7.1 home theater). The
amplifier surround sound speaker outputs are connected to the
wireless sender. The rear and side surround sound speakers are
connected to two wireless receivers. For this setup a second
receiver/amplifier is required (RF-RBREC sold separately).
Note: When setting up your system, you can identify which channel is connected to
which receiver by pressing the SOURCE button on the receiver. The source indicator on
the sender briefly flashes so you can visually identify the correct receiver.
Sender
Receiver
Amplifier
TV
Receiver
RF-RBKIT_10-1157_MAN_V4.fm Page 18 Friday, October 8, 2010 12:53 PM
To Next Page
Loading...
Need help?
General
