12
STEP 3 - Determine whether your TV has a flat back or an
irregular or obstructed back
1 Carefully place your TV screen face-down on a cushioned,
clean surface to protect the screen from damages and
scratches.
2 If your TV has a table-top stand attached, remove the stand.
See the documentation that came with your TV for
instructions.
3 Temporarily lay your existing TV wall mount brackets (not
included) on the back of your TV.
4 Align the screw holes in your existing TV wall mount
brackets with the mounting screw holes on your TV.
5 Identify which type of back your TV may have:
• Flat back: The brackets lay flush against the back of your TV
and do not block any jacks. You do not need spacers when
assembling the wall mount.
You’ll need
RF-SBM101_13-0263_MAN_V1_ENG.fm Page 12 Monday, May 6, 2013 10:53 AM