To Next PageTo Next Page
Need help?Do you have a question about the RocketFish RF-TVMLPTO2V2 and is the answer not in the manual?
General| Product Name | RocketFish RF-TVMLPTO2V2 |
|---|---|
| Category | Racks & Stands |
| Weight Capacity | Up to 100 lbs |
| Tilt | Yes |
| Swivel | No |
| Material | Steel |
| VESA Compliant | Yes |
| Color | Black |
| Adjustable Height | No |
| Mounting Type | Wall Mount |
| Compatible Devices | Televisions |
| VESA Pattern | Up to 600x400 mm |
Specifies the maximum weight capacity for the TV.
Indicates the compatible screen size range for the mount.
Provides the physical dimensions of the wall mount unit.
States the weight of the wall mount unit itself.
Alerts users to small parts that pose a choking hazard to children.
Tools required for measuring distances and marking locations on the wall.
Tools for drilling pilot holes and securing the mount to the wall.
Essential tool for locating wall studs for secure mounting.
The main plate that attaches to the wall.
Brackets that attach to the TV and connect to the wall plate.
A guide used for accurately marking drill hole locations on the wall.
Various screws and washers required for attaching brackets to the TV.
Spacers used for TVs with irregular or obstructed backs.
Anchors used for installation on concrete walls.
Guide to finding the optimal height and position for the wall mount.
Detailed steps for mounting the TV bracket onto a wooden stud wall.
Detailed steps for mounting the TV bracket onto concrete or block walls.
Instructions for identifying TV back type to select correct hardware.
Guide to choosing the correct screws, washers, and spacers for your TV.
Steps for securing brackets to TVs with a flat rear panel.
Steps for securing brackets to TVs with non-flat rear panels using spacers.
Instructions for safely lifting and connecting the TV to the mounted wall plate.
How to fine-tune the TV's position and angle after mounting.
Procedure for safely detaching the TV from the installed wall mount.
