14
- Do not use the supplied AC adapter for other equipment.
Tips:
- Slide the cable spool (provided) into the slots on the back of the receiver from the
top down.
- Before connecting to the AC power outlet, wrap the excessive cable around the
spool.
For information on connecting a wireless sender, refer to the manual
for that device.
Setting up and using your remote control
To set up and use your remote control:
1 Remove the insulation sheet in the battery tray before using the remote
control for the first time.
To AC power
outlet
Cable notch
RF-RBREC_10-1328_MAN_V5.fm Page 14 Wednesday, November 9, 2011 8:40 AM
To Next Page
Loading...
Need help?
General
