Need help?Do you have a question about the Rockford Fosgate P1200.2 Punch and is the answer not in the manual?
General| Brand | Rockford Fosgate |
|---|---|
| Model | P1200.2 Punch |
| Category | Car Amplifier |
| Language | English |
Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss.
Instructions to prevent injury and damage to the unit, or severe injury or death.
Lists the items included in the amplifier's packaging.
Indicates when the unit is turned on.
Indicates thermal protection stage; amplifier shuts down to cool.
Indicates short circuit or low impedance; amplifier shuts down.
Dissipates heat generated by the amplifier's circuitry.
Heavy duty, nickel-plated connectors for speaker wire.
Low frequency boost control for low road noise, 45Hz variable.
Adjustable input gain to match source unit output levels.
12dB/octave Butterworth filter for HP, AP, LP modes, 40-400Hz.
Industry standard jacks for signal level input.
Provides source for daisy-chaining additional amplifiers.
Connects for remote turn-on/turn-off when +12V DC is applied.
Nickel-plated connectors for power and ground wires.
ATC fuses for easy replacement; match type and rating.
Tools needed and general precautions for installing the amplifier.
Guidance on where to mount the amplifier for optimal performance and warranty.
Recommendations for checking vehicle's battery and charging system.
Safety precautions and steps for connecting the amplifier's wiring.
Covers mounting, wiring, and operation of the remote bass control.
Procedure for setting the amplifier's input gain for optimal volume and signal-to-noise.
Guide to setting the HP, AP, or LP crossover points from 40Hz to 400Hz.
Steps to verify correct wiring and power connections.
Diagnosing issues indicated by the Protect or Thermal LEDs.
Steps to troubleshoot lack of audio output from the amplifier.
Methods to eliminate turn-on pop noise from the amplifier.
Troubleshooting steps for engine noise interference in the audio system.
Capacitors to maintain power for Punch amplifiers.
Kits for professional installation of Punch amplifiers.
Adds adjustable center frequency control to boost control.
Details the duration of the warranty for different product types.
Specifies which aspects of the product are covered by the warranty.
Defines the eligibility of the original purchaser for warranty service.
Lists damages or conditions excluded from warranty coverage.
Limitations on implied warranties like merchantability and fitness for use.
Instructions on how to get service or make a warranty claim.
Information regarding EU warranty requirements.
Details warranty coverage for products purchased with specific installation kits.
Defines the original purchaser covered by the extended warranty.
Lists exclusions from the extended warranty coverage.
Limitations on implied warranties for the extended warranty.
Instructions for claiming or using the extended warranty.
States compliance with current EU warranty requirements.
To Next Page