To Next PageTo Next Page
Need help?Do you have a question about the Rockford Fosgate Punch P1000X5D and is the answer not in the manual?
General| Channels | 5 |
|---|---|
| Total Power (RMS) | 1000 Watts |
| Frequency Response | 20 Hz - 20 kHz |
| Crossover | Variable |
| Low Pass Filter | 50 Hz - 250 Hz |
| Input Sensitivity | 200 mV - 4 V |
| Topology | Class D |
| RMS Power @ 2 Ohms | 500 Watts x 1 |
| High Pass Filter | 50Hz - 250Hz |
| Bass Boost | 0 - 12 dB |
Guidelines for preventing hearing damage from high sound pressure levels.
Explanation of WARNING and CAUTION symbols and their implications.
Details on adjusting input gain and variable crossover filters.
Explanation of the Power/Protect LED and connection terminals.
Details on Punch EQ, Infrasonic Filter, and Variable Phase controls.
Explanation of 2/4 Channel Switch, Subwoofer Input, and RCA connections.
Recommendations for optimal and safe placement of the amplifier.
Guidance on vehicle electrical system capacity for the amplifier.
Instructions for routing and connecting amplifier wiring.
Detailed steps for routing power, ground, and remote turn-on wires.
Instructions for connecting RCA inputs and speaker outputs.
Instructions for setting gain, crossover frequency, and phase.
Details on using Punch EQ, Infrasonic Filter, and input switches.
Steps to diagnose problems with power, protect light, and audio output.
Solutions for turn-on pops and engine noise interference.
Explanation of the warranty scope, exclusions, and limitations.
Instructions on how to contact customer service and obtain return authorization.
