Need help?Do you have a question about the Rockford Fosgate Power T8004 and is the answer not in the manual?
General| Brand | Rockford Fosgate |
|---|---|
| Model | Power T8004 |
| Category | Amplifier |
| Language | English |
Alerts users to potential hazards and precautions to prevent injury or damage.
Details the Power, Thermal, and Protect LEDs indicating unit status and issues.
Explains fuse accessibility and the 3-stage convection cooling design for heat dissipation.
Describes speaker terminals for wire gauge and the Para-Punch Remote Bass feature.
Details Infrasonic Filter, Gain Control, Variable Crossover, and Slope settings.
Explains RCA inputs, Pass-Thru jacks, channel switching, and power/remote terminals.
Lists necessary tools and materials for amplifier installation.
Provides guidance on suitable and unsuitable mounting locations for the amplifier.
Discusses battery and charging system requirements for amplifier load.
Provides step-by-step instructions for connecting power, ground, and remote wires.
Instructions for connecting RCA input signals and speaker wires to the amplifier.
Illustrates wiring diagrams for 2-channel and mono bridged speaker configurations.
Illustrates wiring diagrams for 4-channel and stereo bridged speaker configurations.
Instructions for mounting and using the Para-Punch Remote Bass control.
Guide on setting the amplifier's input gain for optimal volume and clarity.
Instructions for setting the crossover point for High Pass, All Pass, or Low Pass modes.
Explains how the Frequency Multiply switch adjusts the crossover frequency range.
Details selecting between 12dB/octave Butterworth or 24dB/octave Linkwitz-Riley filters.
Sets the crossover output for the Pass-Thru jacks for frequency routing.
Engages a 28Hz filter to limit low frequencies, useful for vented enclosures.
Verifies power, fuses, ground, and voltage connections for proper amplifier operation.
Addresses issues when Protect or Thermal lights are illuminated, indicating shorts or overheating.
Troubleshoots lack of audio output by checking RCA connections and signal sources.
Resolves turn-on pop noise by using a delay module or alternate remote turn-on source.
Guides on eliminating engine noise by managing wire routing and grounding.
Details warranty length, coverage, and who is covered by the limited warranty.
Lists items not covered by warranty and limitations on implied warranties.
Explains how to obtain service and outlines EU warranty requirements.
To Next Page