To Next Page
B
Benjamin GonzalezAug 20, 2025
How to fix blown fuse in Rockford Fosgate Receiver?
- TthomastaylorAug 20, 2025
To address a blown fuse in your Rockford Fosgate Receiver, check the unit's fuse and replace it with one that has the correct rating.
How to fix blown fuse in Rockford Fosgate Receiver?
To address a blown fuse in your Rockford Fosgate Receiver, check the unit's fuse and replace it with one that has the correct rating.
What to do if Rockford Fosgate Receiver is not properly grounded?
If your Rockford Fosgate Receiver isn't properly grounded, check the wiring and repair it as necessary.
Why Rockford Fosgate Receiver tuner fails to tune any stations?
If the tuner in your Rockford Fosgate Receiver fails to tune any stations, check all connections and repair them as necessary. The cause may be no antenna or a disconnected or open connection in the cable.
What to do if Rockford Fosgate Receiver USB device is not recognized?
If your Rockford Fosgate Receiver does not recognize the USB device: * Disconnect the USB device and reconnect it. * If the device is still not recognized, try replacing it with a different USB device. Note: USB does not work with Android devices. The cause may be that the USB device is damaged or the connectors are loose.
Why does my Rockford Fosgate Receiver say 'No Signal'?
If your Rockford Fosgate Receiver displays 'No Signal', ensure your vehicle is outdoors with a clear view of the sky and that the SiriusXM magnetic mount antenna is mounted on a metal surface outside the vehicle. Move the SiriusXM antenna away from obstructions and inspect the antenna cable for damage. The SiriusXM Connect Tuner may be having difficulty receiving the SiriusXM satellite signal.
How to tune stations in seek mode on Rockford Fosgate Receiver?
If you are unable to tune stations in seek mode on your Rockford Fosgate Receiver, make sure the tuner LOC mode is off, because you may be in a weak signal area.
What to do if voltage applied to red wire is not between 10.5 & 16 volts in Rockford Fosgate Receiver?
If the voltage applied to the red wire of your Rockford Fosgate Receiver is not between 10.5 & 16 volts, or if there is no voltage present, check the battery, connections, and fuses. Repair or replace them as necessary. If the voltage is above +16 volts, have the electrical system inspected by an authorized service center.
What to do if USB device cannot be inserted into Rockford Fosgate Receiver?
If a USB device cannot be inserted into your Rockford Fosgate Receiver, try reversing the connection direction of the USB device and reinserting it. If this doesn't work, the USB device connector may be broken, and you should replace it with a new one.
Why does my Rockford Fosgate Receiver say 'Check Antenna'?
If your Rockford Fosgate Receiver displays 'Check Antenna', verify that the antenna cable is connected to the SiriusXM Connect Tuner. Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged, because the radio has detected a fault with the SiriusXM antenna. The antenna cable may be either disconnected or damaged.
What to do if Rockford Fosgate Receiver shows no file?
If no sound is heard and the display shows “No File” on your Rockford Fosgate Receiver, store MP3/WMA files properly on the USB device, because no MP3/WMA files may be stored on the USB device. Note: USB does not work with Android devices.
General| Bluetooth | Yes |
|---|---|
| Water Resistant | Yes |
| Preamp Outputs | 2-channel |
| Built-in Amplifier | Yes |
| Display Type | LCD |
| IP Rating | IPX6 |
| USB Input | Yes |
| AUX Input | Yes |
| SiriusXM-Ready | No |
| Pandora Internet Radio | Yes |
| Channels | 4 |
| USB Port | Yes |
| Auxiliary Input | Yes |
| Power Output | 50 Watts x 4 |
| RMS Power Output | 25W x 4 |
| Tuner | AM/FM |
Guidelines for safe listening to prevent hearing loss and unit damage from high sound pressure levels.
Important instructions to prevent injury, death, or unit damage during installation and operation.
Overview of the unit's buttons, rotary encoder, and their functions for operation.
Key points and advice for a safe and effective installation process in a vehicle.
Step-by-step guide for physically mounting the source unit in a vehicle.
Access and adjust core settings for the source unit, including zones, renaming, and general preferences.
Configure balance, fader, EQ settings, crossover, and punch EQ for optimal sound output.
Manage AUX input settings, source gain, and Bluetooth device pairing.
Adjust tuner regions, display brightness, beep settings, and check software version.
Core functions like power, volume, brightness, source selection, and zone management.
How to operate FM, AM, and WB tuners, including presets, auto-store, and local tuning.
Configure WB tuner options like presets, add/remove presets, and local tuning.
Manage repeat and shuffle playback for audio sources and media playback.
Connecting and operating external devices via AUX and USB/iPod interfaces for audio playback.
Connecting and controlling playback from Bluetooth-enabled devices for audio streaming.
Using the Pandora app for music playback, station management, and bookmarking.
Activating subscription, managing presets, channels, categories, and parental controls for SiriusXM.
Common issues and their solutions for basic functions, tuner, USB, AUX, and SiriusXM.
Details on warranty length, what is covered, who is covered, and limitations.
Instructions on how to get service, including contact information and return procedures.
