A PIN code is entered digit by digit, by pressing UP/DOWN to choose the number, and OK to move to
the next digit.
!
GPS Wakeup time (Early Wakeup)
!
By default the unit will wake up 20 seconds before the automatic position reporting time, in order to
obtain a GPS fix before transmission. In challenging conditions, or where visibility of the sky is
limited, it may be required to increase this wakeup time to allow the GPS more time to get a fix.
!
Options range from 20 seconds to 3 minutes. By increasing this time, battery life will be decreased.
!
Screen brightness
!
By default the screen is set to 50% brightness. This option allows you to
change the screen brightness for better viewing in bright sunlight. Increasing
the brightness will decrease battery life.
!
Language
!
This setting will change the language of the device from the default English.
!
Send Config Report
!
This menu option will prompt the Device to send a configuration report detailing its current setup to
our systems for support purposes. Your device will automatically do this every time it is activated, so
you only really need to use this option if asked to by a support engineer.
!
!
Bluetooth Menu
!
If your device is a Standard, Professional or Corporate model, it will have Bluetooth LE 4.0
!
Turn on/off
!
By default Bluetooth is turned off on the device. This is to conserve battery. From this option you can
turn Bluetooth pairing and messaging capabilities on/off.
!
Dependent on the Bluetooth accessories and sensors you have purchased, you may have other
options on this menu.
!
Android / Apple iOS Software
!
To Next Page
Loading...