Rockville TM150 User Manual (English)

Questions and Answers:

M
Marc StevensAug 7, 2025
Why is there no sound or distorted sound from my Rockville Home Cinema speakers?
- R
  Randall MorganAug 7, 2025
  If you are experiencing no sound or distorted sound with your Rockville Home Cinema speakers, verify that all cables are correctly plugged in. Check the volume settings on both the unit and the input source. Ensure you've selected external speakers in your TV's sound output settings and deactivated Dolby Pro-Logic, Dolby ATMOS, etc., selecting PCM in your TV's sound format settings. If using a microphone, confirm it is on and the proper source is selected. If the unit or source volume is maxed out, reduce one to avoid overdriving the unit.
W
Wanda MasonAug 12, 2025
How to fix Bluetooth pairing issues with Rockville Home Cinema speakers?
- B
  burchdanielAug 12, 2025
  If Bluetooth pairing fails on your Rockville Home Cinema speakers, ensure both devices are on and your Bluetooth device is discoverable. Try turning both devices off and on again. Confirm the proper source is selected. Keep the Bluetooth device within 5 feet of the unit during pairing and move both devices away from other electronics like microwaves and wireless routers. Also, verify the unit isn't paired with a previously connected device.
S
srodriguezAug 18, 2025
What to do if my Rockville Home Cinema speakers have no power?
- M
  Matthew RobertsonAug 18, 2025
  If your Rockville Home Cinema speakers have no power, first, ensure the unit is plugged in and the power switch is in the ON position. Next, check that the power cable is not damaged.
L
Lauren MontgomeryAug 23, 2025
How to stop mic feedback on Rockville Home Cinema speakers?
- K
  Kyle CampbellAug 23, 2025
  To address mic feedback with your Rockville Home Cinema speakers, point the microphone away from the speaker. Also, make sure the microphone is positioned behind the speaker, not in front of it.
M
Maria BoltonAug 27, 2025
Why won't my Rockville TM150 play SD or USB files?
- J
  Jacob MayAug 27, 2025
  If your Rockville Home Cinema speakers aren't playing back from SD or USB, ensure you've selected the correct source. Also, verify that the audio files are in one of the specified formats: MP3, WMA, WAV, FLAC, APE, F1A, SBC, or AAC.
M
matthew74Sep 1, 2025
What causes poor mic sound quality on Rockville Home Cinema speakers?
- L
  Laura WrightSep 2, 2025
  If you are experiencing poor mic sound with your Rockville Home Cinema speakers, ensure you are using a proper cable. Use TRS cables when connecting microphones to this unit.